客戶合作流程及售后服務

一、電話交流溝通，邀請客戶來我司參觀考察。

二、了解客戶使用行業領域及對微粉參數要求。

三、根據我司在同行業近20年應用經驗，給客戶提出佳合理的使用型號建議。

四、先發送樣品及檢測報告，供客戶檢測參考。

五、小批量發貨供客戶做小樣品實驗。

六、客戶確認后，以此為標準，批量生產，并保留適量樣品，以供日后雙方查詢參考。

七、定期上門或電話回訪客戶，及時了解客戶需求，提供完善的售后服務保障。

1、我公司提供給客戶的原料與隨貨同行檢測報告單確保一致。

2、我們每個批次的微粉保留樣品，供客戶隨時檢測。

3、客戶使用過程提出疑問，我公司派專業技術人員一時間趕赴客戶公司，幫助分析原因，同時提供本批次其他客戶使用情況，協助客戶找出原因解決問題，確屬我公司原料問題一切損失由我們負責。

Cooperation process and after-sales service for new customers

一．Communicate with customers via phone and invite them to come to our factory for investigation and visit.

二．Know well about customers’ industry field and requirement on micorpowder parameter.

三．Based on our pratical experiences in the same industry for nearly twenty years, we provide customers the optimum and reasonable suggestions on product model.

四．Send sample and test report to customers first for their checking and reference.

五．It’s available to deliver in small batch for the purpose of customer’s experiment on small samples.

六．After customer’s confirmation, , follow this as standard and go into production, keep some samples so that both sides can check in the future.

七．Visit customers regularly or follow-up phone calls, understand customer requirement in time and provide after-sales service support.

1. The raw materials we provided to customers are same as the test report for them,  the report will be delivered with the products together.

2. The sample for each batch of our micropowderwill be remained permanently so that customers can check them at any time.

3. When customers raise questions in the process of usage, we will ask our professional and technical personnel to reach customer’s facotry at once to help them to analysize the reasons. Also we will provide the use of this batch of micropowder by other customers to help customers to figure out why, then help to solve this issue at last. We will be responsible for all the losses caused by our raw materials.